Flooded type water cooled heat pump

40STD Series flooded type water source heat pump can reach the highest COP is 6.2, the lowest chilled water temperature is 5℃ and the highest water outlet temperature is 60℃
  • Item NO.:

    40STD
  • Payment:

    TT, LC
  • Product Origin:

    China
  • Shipping Port:

    Huangpu, Guangzhou
  • Lead Time:

    40days
Inquiry now
Product Detail

Flooded type water cooled heat pump


Profile-Hstar flooded type water source heat pump

40STD Series flooded type water source heat pump can reach the highest COP is 6.2, Cooling capacity is from 478kw to 3754kw, heating capacity from 518kw to 4008kw, the lowest chilled water temperature is 5℃, and the highest water outlet temperature is 60℃. Units are suitable for industry and commerce building with cooling and heating need

Hstar flooded type screw type water source heat pump


1. High Efficiency---Hstar flooded type  water source heat pump
* Unit is installed flooded type evaporator, energy consumption decreases 15-25% compare to dry-type evaporator
*The unit adopts twin screw type compressor, match with self-produce high efficiency condenser and evaporator, International brand expansion valve is applied, to ensure the performance of the unit reach the national primary energy saving standard.
*With patent heat recovery option, heat reclaimed can be 30% to 100% of cooling capacity in cooling mode, get free hot water for around a year.
*Heat reacovery do not use any energy, on the other hand increases unit efficiency about 5%.


2. Reliability and Stability---Hstar flooded type water source heat pump
*8 safety protection devices are installed, ensure the chiller operation well.
* The unit is using an efficient oil return device, therfefore the unit run safety and stable.
*All units are 100% tested by National Test Laboratory to ensure the performance

Hstar flooded type screw type water source heat pump


3. Intelligent Control--Hstar flooded type water source heat pump
* Chiller adopted microcomputer with touch screen control system, provides the simplest and completest operation interface, timely feedbacks all maintenance information

4. Special design---Hstar flooded type  water source heat pump
Various refrigerant available: R22, R407c, R134a
* The unit can connect to the center control system wich feedback the operational status and achieve remote service
Hstar flooded type screw type water source heat pump



Contact us---Hstar flooded type water source heat pump
Contac person: Nataly Zhang
Email to : nataly@hstars.com.cn
Mobile: +8615812439313
Skype: live:natalyzhang_1

Send a Message

If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

contact experts
Contact Person: Ms May Chow Mobile/WhatsApp: +86 18665672648 Tel: +86-20-62266755 Ext. 886 Fax: +86-20-82266081 Email: maychow@hstars.com.cn
Related Products
Scroll Water Source Heat Pump Scroll Water Source Heat Pump unit
Scroll Water Source Heat Pump unit is manufactured by famous brand compressor and electronic control originals, and is equipped with independent research and development of high-efficiency spiral heat exchanger
Water Source Heat Pump Unit Dry Screw Water Source Heat Pump Unit
Industrial dry type screw water source heat pump unit can meet the needs of winter heating and summer cooling through advanced water source heat pump central air conditioning system. Besides,there is no need for boiler room system for heating, no cooling tower is needed for cooling, and no pollution or emission is realized during use.
Screw type heat pump HStars screw type water source heat pump
40STD Series flooded type water source heat pump can reach the highest COP is 6.0, the lowest chilled water temperature is 5℃ and the highest water outlet temperature is 50℃
constant temperature and humidity air handling unit DX coil type air handling unit with heat recovery
Air handling unit system Cooling capacity: 25kW~888kW evironment temperature:2-43℃
Shell and Tube Heat Exchanger Shell and Tube Flooded Evaporator
Shell and Tube Flooded Evaporator:1) Cooling Capacity: 80~1500RT;
industry chiller Air cooled screw type chiller for industry use
HStars air cooled screw type water chiller adpots Hanbell screw compressors and heat recovery optional for clients for inustry use . High quality with easy operation.

Copyright © 2015-2019 H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

/ Blog / Sitemap / XML
  • 1
  • Linkedin
  • twitter
  • instagram
  • youtube
welcome to H.Stars
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

Home

Products

about

contact