*Liquid sprayed from above is to form a thin film on the surface of the heat exchange tube to obtain the best heat transfer effect. *The liquid separation and deforming device is national patented. *With no superheat requirement of refrigerant vapor the evaporation temperature can be greatly increased. *Achieve 30% higher heat transfer coefficient and 35% less refrigerant charge volume than flooded evaporators. The spray type evaporator is suitable for screw, centrifugal, magnetic bearing and other types of compressor.

Modular evaporator + condenser is an integrated unit heat exchanger composed of evaporator and condenser as a modular combination industrial assembled shell and tube heat exchanger.

The water-to-water heat exchanger is a heat exchange and conduction device with a wide range of uses. Water to water shell and tube heat exchanger is mainly composed of shell, tube sheet, tube bundle, baffle and box body.

Our falling film evaporator are compact and easy to install, suitable for chillers with multiple compressor systems.

The secondary refrigerant passes through the heat exchange tube, the refrigerant flows in the shell side and completely immerses the heat exchange tube, and evaporates outside the heat exchange tube after absorbing heat.

UAR High efficiency shell and tube condenser reservoir with high heat transfer efficiency.

Shell and tube titanium heat exchanger capacity range : 3TR ~ 900TR Refrigerant type: R134a, R407c, R404a , R410a etc. Type: Flooded type, Marine type, water-water type, heat recovery type

Falling film evaporators are used extensively in chemical process industry, food and paper industry. Due to the absence of static head effect caused by liquid column as in other types of evaporators, evaporation can take place at very small effective mean temperature differences.

Finned tube coil heat exchanger Product material: copper tube, hydrophilic aluminum fin Copper pipe diameter: 9.52mm, 12.7 mm, 15.88 mm,

Internal enhanced thread, ensure high heat transfer efficiency; Cooling capacity from 2.5 TR to 1,000 TR; All self-made components, strict quality & cost control, inspected by our own lab and authorized third party before delivery; 1 to 8 refrigerating circuits available, or as per special design; CE, PED and ASME certificates are optional; Stainless steel evaporator, titanium evaporator, flooded evaporator, spray type evaporator are available; OEM business is welcomed.

falling film evaporator-flooded evaporator Introduction: Water-cooled screw industrial chiller heat exchanger Brand: Hstars Cooling Capacity range: 120.3Kw ~ 2000Kw Applications: Chemical, pharmaceutical, industrial processing equipment, food processing and other industrial sites Unit parameters: Cooling Capacity  range: 120.3Kw ~ 2000Kw Temperature adjustment range: 7 ~ 20 °C Application areas: chemical, pharmaceutical, industrial processing equipment, food processing and other industrial sites Industrial water cooled chiller flooded/falling film heat exchanger features: The main components are perfectly matched with each other,with energy saving design,COP up to 6.0

Titanium shell and tube stainless evaporator is widely used in marine field as well suitable for those system which needs to process chemical or corrosive liquid. This evaporator also ensure high heat transfer efficiency.