Carbonated Drinks and Syrup Water Cooled Screw Type Chiller

40STD series low temperature chiller is a series of products developed, designed and manufactured by H.Stars for refrigeration, refrigeration, food processing, quick freezing, industrial cooling and other industries.

  • Item NO.:

    40STD
Inquiry now
Product Detail

Carbonated Drinks and Syrup Water Cooled Screw Type Chiller


Introduction

40STD series low temperature chiller is a series of products developed, designed and manufactured by H.Stars for refrigeration, refrigeration, food processing, quick freezing, industrial cooling and other industries. The unit has 350 standard specifications and is divided into five types according to the evaporation temperature. Each model has 70 standard specifications. The cooling range is 14200 kcal/h ~2036600 kcal/h, and the frozen aqueous solution temperature range is -35~10 °C. In addition to the standard specifications, various non-standard units can be customized according to user requirements. In addition, we can also produce salt water, high voltage and other power supply products.


Carbonated Drinks & Syrup Water Cooled Screw Type Chiller




Unit features:

1, Efficient

The unit adopts twin-screw compressor to match the high-efficiency condenser produced by the star with the evaporator and the inlet expansion valve. The four components are perfectly matched.

The unit is equipped with a stellar patented heat recovery unit. The heat recoverable under low temperature conditions is 30%-80% of the cooling capacity, and the maximum water temperature of the hot water can reach 70°C.

When heat is recovered, the overall efficiency of the unit can be increased by 5%.

2, Reliable operation

The unit has 7 kinds of safety protection measures to ensure the normal operation of the unit.

The unit is designed for double circuit and double compressor. When a single compressor fails, the other compressor can still operate normally without affecting the customer's use.

All units are tested by the national safety inspection system before leaving the factory to ensure that the unit performance meets national standards.

3, Intelligent management

The unit adopts the microcomputer touch control system to provide the simplest and most thoughtful operation interface and timely feedback of various maintenance information.

The unit control system can be connected to the user's central control system, and the customer can understand the unit's operation at all times.

4, Easy to install and maintain

The unit has been filled with refrigerant and lubricating oil before leaving the factory. The customer only needs to connect the inlet and outlet pipes and the power supply to run.

The control interface directly displays the fault content, which is convenient for timely understanding of the fault and elimination.

5, A variety of refrigerant options to meet the different needs of customers

   The unit can also provide R407C, R404a and other refrigerants according to customer needs.



Sample Project (Personalized customization)

1. Place: Cooling syrup and Carbonated Drinks

2. Capacity:260KW (According to customer requirement)

3. Compressor Type: Hanbell screw type

4. Power supply: 380v-3p-50Hz (According to customer requirement)

5. Refrigerant: R22, R404a, R407c, etc(Acoording to customer requirement)

6. Evaporator in/outlet temperature: 2℃/-3℃

7. Condenser in/outlet temperature: 30℃/35℃

8. Three water pump

(1) Internal circulation frozen water pump: Flow rate 60m³, Head 16.2m, Power 4KW

(2) External circulation frozen water pump: Flow rate 60m³, Head 16.2m, Power 4KW

(3) Cooling water pump: Flow rate 60m³, Head 16.2m, Power 4KW

9. Chiller with a 3m³304# stainless water tank

10. Chiller with a 100m³/h cooling tower

11. Chiller with a stainless food level plate type heat exchanger.

Carbonated Drinks & Syrup Water Cooled Screw Type Chiller

Carbonated Drinks & Syrup Water Cooled Screw Type Chiller

Carbonated Drinks & Syrup Water Cooled Screw Type Chiller



Please contact me

Ann
Sales Engineer

H'Stars (Guangzhou) Refrigerating Equipment Group Ltd.

No.1 Guoyuan 4th Road,the Northern Part of the Eastern Section of Guangzhou Econmic &Technology Development District,Guangzhou,China.

Tex : +86 -20-62266755 ext 673| Fax:  +86 -20-62266081 
Mobile/WhatsApp/Wechat: +8615800240365
Web:  www.hstarschiller.cocm    www.heatexchangermaker.com     



Send a Message

If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

contact experts
Contact Person: Ms May Chow Mobile/WhatsApp: +86 18665672648 Tel: +86-20-62266755 Ext. 886 Fax: +86-20-82266081 Email: maychow@hstars.com.cn
Related Products
hot water chiller hot water chiller with cold recovery
Hot water chiller(cold recovery) is using the air as low heat source to produce the heat water. Energy saving, high efficiency and environmental protection, the waste cold discharged in the heating process is recovered through the cold recovery device, to improve the comprehensive energy efficiency and realize zero cost refrigeration
Air Handling Unit Air Handling Unit System
This extra quiet Air Handling Unit (AHU) is designed for office/ theater/cinema /hotel /hospital.ect with cold bridge free Al Penta-post frame double skin PU insulation.
Shell and Tube Heat Exchanger Shell and Tube Flooded Evaporator
Shell and Tube Flooded Evaporator:1) Cooling Capacity: 80~1500RT;
Stainless Shell And Tube Flooded Type Heat Exchanger Stainless Shell And Tube Flooded Type Evaporator
UAR Shell and tube auto evaporator are designed to provide its clients with the best solutions available in air-condition and refrigeration usage. The main function is to evaporate the liquid refrigerant into refrigerating steam and refrigerate the chilled water. The shell and tube part is made of high performance tubes Q235-B, #304 #316 stainless steel. of special coppers, finned externally and grooved internally.
Industrial Cooling Tower Industrial Cooling Tower for Chiller
This industrial cooling tower has low vibration, low noise, high efficiency and low power consumption,widely used in cooling and circulating water systems for refrigeration, air conditioning, chemical, light industry and other industries.
Spray Type Screw Water Cooled Chiller Spray Type Screw Water Cooled Chiller
"H'Stars" 40STD series spray screw water-cooled chiller adopts high-efficiency twin-screw compressor, self-developed and manufactured high-efficiency spray evaporator, R22, just 34a refrigerant, energy efficiency up to 5.5. The unit has 20 standard specifications.

Copyright © 2015-2019 H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

/ Blog / Sitemap / XML
  • 1
  • Linkedin
  • twitter
  • instagram
  • youtube
welcome to H.Stars
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

Home

Products

about

contact