H.Stars Group Shell And Heat Exchanger

Heat exchangers are a general-purpose equipment widely used in petrochemical, metallurgy, refrigeration, gas and other industries.
Inquiry now
Product Detail

H.Stars Group Shell And Heat Exchanger

The U-tube heat exchanger has only one tube plate, and both ends of the tube are fixed on the same tube plate. The tube can be freely stretched and stretched without thermal stress, and the thermal compensation performance is good. The tube tube adopts double tube process, the flow is longer, and the flow rate is longer. High, good heat transfer performance, strong pressure bearing capacity, tube bundle can be extracted from the housing, easy to repair and clean, and the structure is simple and the cost is cheap.

Shell and tube heat exchanger

Performance characteristics
Simple structure, only one tube plate, less sealing surface, reliable operation and low cost
The tube bundle can be extracted and the tube (shell) can be easily cleaned.
Light weight, suitable for high temperature and high pressure applications.

Overview of H.Stars Group

Technical characteristics
Maximum working pressure allowed: tube length 8.5MPa, shell side 0.6MPa
Tube design temperature: -20 ° C
Shell design temperature: 100 ° C,
Tube process medium: natural gas, relative density: 0.6, characteristics: explosive;
Shell process medium: water

Certificates of H.Stars Group


Contact us:
Vincent Lau
Tex : +86 -20-62266755 ext 624| Fax:  +86 -20-62266081 
Mobile/WhatssApp/wechat: +8613570527221
E-mail:vincent@hstars.com.cn

Send a Message

If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

contact experts
Contact Person: Ms May Chow Mobile/WhatsApp: +86 18665672648 Tel: +86-20-62266755 Ext. 886 Fax: +86-20-82266081 Email: maychow@hstars.com.cn
Related Products
Industrial Heat Exchanger Industrial Shell And Tube Heat Exchanger
Shell and tube heat exchanger is one of the most important part for HVAC unit like chiller unit and heat pump unit,widely used in all kinds of industrial and commercial area.
flooded evaporator falling film evaporator
falling film evaporator-flooded evaporator Introduction: Water-cooled screw industrial chiller heat exchanger Brand: Hstars Cooling Capacity range: 120.3Kw ~ 2000Kw Applications: Chemical, pharmaceutical, industrial processing equipment, food processing and other industrial sites Unit parameters: Cooling Capacity  range: 120.3Kw ~ 2000Kw Temperature adjustment range: 7 ~ 20 °C Application areas: chemical, pharmaceutical, industrial processing equipment, food processing and other industrial sites Industrial water cooled chiller flooded/falling film heat exchanger features: The main components are perfectly matched with each other,with energy saving design,COP up to 6.0
Module Shell and Tube Heat Exchanger Condenser Module Shell and Tube Heat Exchanger Condenser/ Evaporator High Strength Anti Corrosion Chiller Unit for Chemical Industry Use
This Shell and Tube heat exchanger adopt high-efficiency copper-nickel alloy copper tubes, which are immersed in the refrigerant, as a result, the heat transfer efficiency is high, and the gas liquid refrigerant is fully separated to prevent liquid hammer. The performance of the whole machine is efficient, clean, safe, energy-saving, beautiful and durable.
Industrial Heat Exchanger Industrial Flooded Shell And Tube Heat Exchanger
H.Stars flooeded type shell and tube heat exchangers are widely used in so many different industries like hotel,hospital,cold storage and mould injection ect,as part of chiller,certified with CE. Over the decades, H.Stars heat exchanger has been sold to more than 58 countries,covering Asia, Africa, Europe and Oceania.
Industrial Heat Exchanger Industrial Shell And Tube Heat Exchanger
Shell and tube heat exchanger design is one of the most common types of exchangers used in heat transfer.Typically used in application when a process requires large amounts of fliud to be heated or cooled. As a result of their design,shell and tube heat exchanger offer a large surface area and thus high heat transfer efficiency.
high temperature hot water unit 85℃ High Temperature Hot Water Chiller Unit
H'Stars 85℃ high temperature hot water unit is a high-efficiency hot water unit developed and manufactured by H'Stars. The temperature of the inlet and outlet water of the low temperature heat source is 5-20℃, and the application range is wide. The high temperature side outlet water temperature is between 65-85℃. Adopt green environmental protection refrigerant HFC-134a.

Copyright © 2015-2019 H.Stars (Guangzhou) Refrigerating Equipment Group Ltd.

/ Blog / Sitemap / XML
  • 1
  • Linkedin
  • twitter
  • instagram
  • youtube
welcome to H.Stars
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!

Home

Products

about

contact