Industrial and Commercial Air-cooled Condensing

Industrial and Commercial Air-cooled Condensing

Parameters:

Cooling capacity：25kw ~ 1600kw

Airflow range：2692m3/h ~ 395781m3/h

Features:

1. Perfect airflow design: reasonable fan nozzle design can greatly improve air fluidity and reduce noise.

2. Efficient heat transfer copper tube: high heat transfer efficiency, and reduce the refrigerant in the coil pressure drop.

3. Efficient fan: it can reduce the energy consumption of the fan while obtaining large heat exchange. Meanwhile, the fan has stable operation and long service life.

Installation and maintenance

1. It can be installed in the roof of the building or other well-ventilated environment without additional cooling water system;

2. It is recommended to use multiple units in parallel during transportation, lifting and installation;

3. The unit should be kept dry and ventilated, and the surrounding air should not contain corrosive substances, so as to avoid close proximity to chimneys, generators, boilers, etc. where acid gas or heat is easily generated;

4. In order to prevent the bottom of the unit from rusting, it is better to use the cross steel frame to support the bottom of the unit during installation, so that the unit is not less than 20cm away from the ground;

5. The inlet and outlet of the cold (hot) water pipe and the front and rear nozzles of the cold (hot) water pump need to be equipped with shockproof soft joints. Gate valve thermometer, water pressure gauge, heat exchanger outlet pipe side water flow switch, water pump inlet side filter and other auxiliary devices;

6. When configuring the power cord, please select a wire with a large cross-sectional area, so that the power flow of the power cord is not less than 20%.